Vive Health 180 Cervical Collar Replacement Kit Coretech

Replacement parts for the Vive Health 180 Cervical Collar Coretech

PAD INSTALLATION

• For easier installation position the angle of the chin-rest to its highest setting.
• Fold the clavicle pad in half with the gray color on the outside, position the pad, and press firmly to ensure the pad stays in place.
• Position the neck pad, and press firmly to ensure the pad stays in place.
• Position the 2 back panel pads, there is an upper and a lower pad, press firmly to ensure the pads stay in place.

HOOK AND LOOP TABS (Optional)

• • The kit includes 10 total pcs of hook and loop tabs for replacement, replace as needed.
  • Before applying make sure the area is clean from any dirty or old adhesive residue.
  • Peel off the paper backing from the hook and loop tab.
  • Apply the hook and loop tab directly to the plastic collar, and press firmly to ensure the adhesive makes full contact.
  • Allow the adhesive to set for at least 30 minutes before use.

HOOK AND LOOP STRAP (Optional)

• The kit includes a spare secure strap, replace if necessary.
• Loop the secure strap through either end of the back panel, there are slots on each end.
• Extend the back panel to its tallest setting then loop the strap through the middle d-rings slots.
• Loop the strap through the opposite end of the back panel, and adjust as necessary.

What’s Included

• 1 Chin Pad (A)
• 1 Clavicle Pad (B)
• 2 Back Panel Pads (C)
• 1 Secure Strap, length 18” (D)
• 5 Round Hook and Loop Tabs (15mm) (E)
• 5 Round Hook and Loop Tabs (20mm) (F)

Specifications

• Colors: gray, black
• Thickness: 10mm on all
• Weight: 0.12 lbs total
• Materials: PU cotton polyester
• Latex-free: Yes
• Care: Hand washes, cold with mild detergent. Air Dry